Blister board is an amorphous, odorless, non-toxic, highly transparent colorless or slightly yellow thermoplastic engineering plastic with excellent physical and mechanical properties, especially excellent impact resistance, tensile strength, bending strength, compressive strength High; small creep, stable size; good heat resistance and low temperature resistance, stable mechanical properties, dimensional stability, electrical properties and flame retardancy in a wide temperature range, can be in -60 ~ Long-term use at 120 ℃; no obvious melting point, in a molten state at 220-230 ℃; due to the rigidity of the molecular chain, the viscosity of the resin melt is large; the water absorption rate is small, the shrinkage rate is small, the dimensional accuracy is high, the dimensional stability is good, the film is breathable Low resistance; self-extinguishing material; stable to light, but not resistant to ultraviolet light, good weather resistance; resistant to oil, acid, strong alkali, oxidizing acids and amines, ketones, soluble in chlorinated hydrocarbons and aromatics Solvents can easily cause hydrolysis and cracking in water for a long time. The disadvantage is that due to poor fatigue resistance, stress cracking is easy to occur, poor solvent resistance, and poor wear resistance.
The blister board is made of medium density board as the base material. The surface is flat and easy to shape. After being formed with engraving and milling patterns, the patterns are diverse and three-dimensional. If the home decoration is European or pastoral, it is recommended to choose Blister.
Blister-type door panel is rich in color, realistic wood grain, pure monochromatic color, no cracking and deformation, scratch resistance, heat resistance, stain resistance, fade resistance, is the most mature cabinet material, and simple daily maintenance. Since the four sides of the door panel can be sealed into one body after blister molding, no edge sealing is required, which solves the problems of long-term glue openin