Views:875 Author:Site Editor Publish Time: 2019-08-24 Origin:Site
Decorative veneer veneer plywood (decorative panel, veneer) is a thin veneer with a thickness of 0.2 mm or more, which is made of plywood and has a single-sided decorative effect. Decorative plates. It is a special way of splint existence, the thickness is 3Mm, the good panel can even reach 5mm, but the market in Nantong is 2.5-2.8mm.
Decorative panels are generally used for clear oil decoration. The surface layer is thin and the board is a precious wood species with natural and gorgeous texture. The substrate is generally plywood and the performance is stable and reliable.
Decorative panels are commonly used decorative materials for home decoration.Decorative panels
There are unscrupulous merchants making a fuss on the surface layer board. The surface panel is too thin and the thickness is only about 0.1. In order to prevent the color of the bottom plate from being exposed, firstly paint a layer of the same color as the surface layer on the bottom plate, and then paste the surface layer panel, due to the paint and glue. Poor adhesion, resulting in poor adhesion strength of the surface panel, easy to drum. The consumer chooses the purpose, and the blade can be used to scrape the surface layer. Where the excellent paint is scraped, most of the surface panel thickness is not up to standard.
A high-quality decorative panel will make the living room shine. After using the inferior decorative panel for a period of time, the surface will be bulged and cracked. Pay attention to the following points when purchasing decorative panels:Decorative panels
1 recognize the difference between artificial veneer veneer and natural wood veneer veneer. The texture of the former is basically straight texture, the texture pattern has rules; the latter is a natural wood pattern, and the natural variability of the texture pattern is relatively large and irregular.
2 decorative is better. The appearance of the decorative panel should have a good aesthetic, the material should be fine and uniform, the color is clear, and the wood grain is beautiful. The texture of the matching board and the parquet should be arranged according to a certain regularity, the natural color is similar, and the seam is almost parallel to the edge of the board.
3 The surface should be free of obvious defects. The surface of the selected decorative board should be smooth, free of burr groove marks and planing knife marks; there should be no penetration phenomenon and board surface contamination (such as local yellowing and blackening); the surface should be selected as follows without cracks, cracks, no knots, The skin, resin enamel and gum road; the natural warpage of the whole board should be as small as possible to avoid the sand penetration phenomenon caused by the improper operation of the sanding process.
4 no glue phenomenon. It should be noted that there should be no bulging or delamination between the surface veneer and the substrate and between the layers inside the substrate.
The 5-knife method is the most intuitive method to check the bonding strength. It is opened along the adhesive layer with a sharp flat blade. If the rubber layer is broken and the wood is not damaged, the bonding strength is poor.
6 to choose a plate with low formaldehyde emission. When choosing, avoid decorative panels with a pungent odor.Decorative panels
7 Choose a good product with a clear production company. Most of the products with clear factory name, factory address and trademark have good performance.